Ready-to-Apply Instructions
SIGNARAMA is the leader in ready-to-apply (RTA) vinyl lettering and graphics.
Below are the simple steps to achieving a professional look with vinyl lettering and graphics.
-
Start with a clean surface
Make certain the application surface is dry and free of debris and smudges.
-
Create guidelines
The best method for creating a guide on where to place your letters or graphics is to create a horizontal line using a leveling device, then an intersecting vertical line. Use these lines as a guide for your application.
-
Pull away the backing
Place the lettering or graphic side face down. Slowly pull the backing paper from the transfer tape holding the lettering or graphic.
-
Adhere letters or graphic to the desired surface
Carefully position the lettering or graphic using your guidelines. With a squeegee or similar device, rub the application carefully, yet firmly, removing any air bubbles and adhering the letters or graphic to the surface.
-
Remove the transfer tape
Slowly pull the transfer tape from the lettering or graphic beneath. Be careful not to pull or shift the lettering or graphic. If you notice this happening, replace the transfer tape and again firmly rub the area until the lettering or graphic is adequately adhered to the surface.
Note:
Show installation process with photos or video